Convoy S2+ LED Flashlight SST20 7135x8 650lm

Description: Convoy S2+ LED Flashlight SST20 7135x8 650lm

Brand Name: Convoy

Model Number: S2+ Desert Tan

LED Type: Luminus SST20 LED with DTP copper plate

CRI: Ra=95(4000K/2700K), Ra=70(6500K/5000K)

Driver: 7135 x 8 Biscotti firmware

The Convoy S2+ SST20 is a portable EDC flashlight made of lightweight & corrosion resistant anodised aluminum alloy suitable as night light or work light. It uses Luminus SST20 LED, Biscotti firmware, Smooth reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 650 lm output, 10825 cd intensity, and a beam distance of 187m. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws further.

The memory function will remember the last used mode and can be enabled or disabled. It has a strobe function as a self defense tool by disorienting the person it is aimed at. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed. The reverse clicky switch allows you to change modes while the light is on. The flashlight is designed to be easy to carry including clipped to pocket, backpack, hat, purse and glove compartment or a lanyard around your wrist.

Category: Camping, Hiking, Biking

Package Contents:

• 1 x Flashlight Convoy S2+ Desert Tan SST20 7135x8
• 1 x Pocket Clip
• 1 x Hand Strap
• Please Note: Battery is NOT INCLUDED

Function:

• Switch: Mechanical tail switch (metallic Reverse clicky switch)
• This flashlight does not have temperature control feature
• Reverse polarity protection from improper battery installation
• Low battery warning. The flashlight will start blinking when the battery runs low.
• Anodised Pocket clip (can be mounted in 5 different positions, including deep pocket carry)
• Light Modes: Programmable user interface with 12 mode group options
• Strobe: Yes
• SOS/Beacon: Yes
• Zooming function: No
• Memory function: Yes

Additional Information:

• Body Material: Aluminum Alloy
• Color Temperature: 6500K (White Light), 5000K (Sun Light), 4000K (Neutral White), 2700K (Warm White)
• Drive Current: 2800mA (7135*8)
• Output: 650 lumens
• Battery Type: 1 x 18650 lithium ion (protected or unprotected)
• Waterproof Standard: IPX-8 (submersion up to a maximum depth of 2m underwater for up to 30 minutes)
• Reflector: Smooth Reflector
• Lens: Ar-coated glass
• Beam Distance: 187m
• Certification: CCC, CE, FCC, ROHS
• Size: 118mm(L) × 24mm(D)
• Weight: 76g (without batteries)

Operation:

1 - Turn ON/OFF: Fully press the rear switch until you hear a click, to turn the light ON/OFF.
2 - Mode Cycle: While ON, short tap (half press) to advance to the next mode. Or long tap (half press) to reset to the first mode.
3 - Config Mode: When the flashlight is turned on, tap the switch 10 times quickly (until the light just stays dark) to enter into config mode. Now release the switch, and you’ll see 1 blink, followed by quick flashing. It will then do 2 blinks and quick flashing. Those are the 2 options you have. The first blink is to select your desired Mode Group menu, while the second is to turn the mode memory on/off.
4 - Enable/Disable Mode Memory: In config mode, when you see the 2 blinks + flashing, fully click the switch to toggle the mode memory on/off. To change the memory mode again, tap the switch again for 10+ times to enter programming mode, and wait for the 2nd blink, and again turn the light off.
5 - Group Select Mode: In config mode, when you see the first blink + flashing, fully click the switch (the light will turn off) to enable mode group selection. If you click again to turn the light back on, you enter Mode Group Selection. In this mode, you will see a number of blinks. At the beginning, you will see only 1 blink. When you wait about 3 seconds, the light will blink 2 times. After another 3 seconds, it will blink 3 times, and so on. This continues until you see all 12 blinks. Click to turn the light off after N blinks to select mode group N e.g. to activate Mode group 5 (Low 1% -- Medium 20% -- High 100%), turn the light off after the 5 blinks.