Convoy S11 LED Flashlight XHP50.2 2400lm (include 26650 Battery)

Description: Convoy S11 LED Flashlight XHP50.2 

Brand Name: Convoy

Model Number: S11 Black/Gray/Silver

LED Type: Cree XHP50.2

Driver: Maximum output current of 3A. Non-PWM, Constant-current without flicker.

The Convoy S11 XHP50.2 (released in 2019) uses Cree XHP50.2 LED, Orange-Peel/Smooth reflector and 1 x 26650 Li-Ion battery. The powerful emitter in this flashlight provides up to 2400 lm output, 10000 cd intensity, and a beam distance of 200m.

The memory function will remember the last used mode. If you keep the same mode longer than 3 seconds, the current mode is memorized and the next time the flashlight will turn on in this mode. Built-in LVP prevents damage to the battery from over-discharge, so protected batteries are not necessary. When the battery voltage is 2.9-3.1V, the flashlight will display alarm showing weak brightness and flicker. The flashlight is automatically turned off after a while. If temperature control chip detection reaches 60 degrees Celsius, it will automatically switch to mid mode and the brightness drops to 30% so the flashlight does not overheat.

Available Options:

• 4 Modes: Simple operation with 0.1%-3%-30%-100% preset brightness levels, suitable for ordinary use.
• 12 Groups: Programmable user interface with 12 mode group options, and memory can be turned on or off.
• OP: The orange peel reflector is textured and bumpy or grainy looking. This type of reflector helps disseminates the beam, allowing the light to spread a little wider and gives a nice smooth beam.
• SMO: The smooth reflector creates a tighter, more focused and precise beam. It allows for longer range beam throws and is excellent for hunting, search and rescue, and general use.

Category: Hunting, Camping, Hiking, Biking

Package Contents:

1 x Flashlight Convoy S11 XHP50.2 
1 x Hand Strap
2 x 18650 to 26650 adapter o-rings
1 x 26650 rechargeable Li-ion Battery, 5000mAh 3.7V

Function:

• Switch: Mechanical tail switch (Reverse clicky switch)
• Mode memory
• Reverse battery protection
• Low voltage protection
• Temperature protection
• Light Modes: 4 modes (0.1%-3%-30%-100%) / 12 groups
• Strobe: 12 groups only, 4 modes does not have Strobe
• SOS/Beacon: 12 groups only, 4 modes does not have SOS
• Zooming function: No
• Memory function: Yes

Additional Information:

• Body Material: Aluminum Alloy with HAIII hard-anodized finish
• Color Temperature: 6500K (White Light), 5000K (Sun Light), 4000K (Neutral White), 3000K (Warm White)
• Drive Current: 3A max output current
• Output: 2000-2400 lumens
• Battery Type: 1 x 26650/18650 lithium (protected or unprotected)
• Waterproof Standard: IPX-7 (submersion up to a maximum depth of 1m underwater for up to 30 minutes)
• Reflector: OP = Orange Peel reflector / SMO = Smooth reflector
• Lens: Double side Ar-coated glass lens
• Beam Distance: 200m
• Certification: FCC, CCC, CE, ROHS
• Size: 139mm(L) × 33mm(D)
• Weight: 171g (without batteries)

4 Modes Operation:

Fully press the rear switch to turn the flashlight on and off. The button can be pressed halfway to change mode 0.1%-3%-30%-100%.

12 Groups Operation:

1 - Turn ON/OFF: Fully press the rear switch to turn the light ON/OFF.
2 - Mode Cycle: While ON, tap the switch (half press) to advance to the next mode.
3 - Config Mode: When the flashlight is turned on, tap the switch 20 times quickly (until the light just stays dark) to enter into config mode. Now release the switch, and you’ll see 1 blink, followed by quick flashing. It will then do 2 blinks and quick flashing. Those are the 2 options you have. The first blink is to select your desired Mode Group menu, while the second is to turn the mode memory on/off.
4 - Enable/Disable Mode Memory: In config mode, when you see the 2 blinks + flashing, tap the switch to toggle the mode memory on/off. To change the memory mode again, tap the switch again for 20+ times to enter programming mode, and wait for the 2nd blink before you tap the switch.
5 - Group Select Mode: In config mode, when you see the first blink + flashing, tap the switch to enter mode group selection. In this mode, you will see a number of blinks. At the beginning, you will see only 1 blink. When you wait about 3 seconds, the light will blink 2 times. After another 3 seconds, it will blink 3 times, and so on. This continues until you see all 12 blinks. Tap the switch after N blinks to select mode group N e.g. to activate Mode group 5 (Low 1% -- Medium 20% -- High 100%), tap the switch after the 5 blinks.

• Mode group 1 (0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check)
• Mode group 2 (0.1%, 1%, 10%, 35%, 100%)
• Mode group 3 (100%, 35%, 10%, 1%, 0.1%)
• Mode group 4 (1%, 20%, 100%, strobe, biking, battery-check, SOS)
• Mode group 5 (1%, 20%, 100%)
• Mode group 6 (100%, 20%, 1%)
• Mode group 7 (0.1%, 1%, 10%, 50%, strobe, biking, battery-check, SOS)
• Mode group 8 (0.1%, 1%, 10%, 50%)
• Mode group 9 (50%, 10%, 1%, 0.1%)
• Mode group 10 (1%, 10%, 35%, 100%)
• Mode group 11 (100%, 20%, strobe)
• Mode group 12 (100% only)

6 - Battery-check indicator: <2.95V 1 flash, 2.95-3.25V 2 flashes, 3.25-3.55V 3 flashes, 3.55-3.85V 4 flashes, >3.85V 5 flashes

Color temperature:

Light modes:

Beamshot at 50m distance: